Microlight3D at FMNT summit !

close permanently

Microscale white light emitters fabricated by two-photon polymerization lithography on functional resist
Guilherme Osvaldo Dias, Olivier Lecarme, Julien Cordeiro, Emmanuel Picard, David Peyrade
Microelectronic Engineering 257 (2022) 11175 – https://doi.org/10.1016/j.mee.2022.111751


3D two-photon polymerization of smart cell gelatin – collagen matrixes with incorporated ruthenium complexes for the monitoring of local oxygen tensions

B. Van der Sanden, L. Gredy, D. Wion, O. Stephan

Acta Biomaterialia, Volume 130, August 2021, Pages 172-182, https://doi.org/10.1016/j.actbio.2021.06.021


Design and evaluation of a 3D multi-manifold micromixer realized by a double-Archimedes-screw for rapid mixing within a short distance

Chow-Shing Shin, Patrice L.Baldeck, Yung-Mau Nie, Yi-Hsiung Lee, Zheng-DaLin, Chia-Chin Chiang, Chih-Lang Lin

Journal of the Taiwan Institute of Chemical Engineers, Volume 120, March 2021, Pages 59-66, https://doi.org/10.1016/j.jtice.2021.03.028


Fabrication and Magnetic Actuation of 3D-Microprinted Multifunctional Hybrid Microstructures

Victor Vieille, Roxane Pétrot, Olivier Stéphan, Guillaume Delattre, Florence Marchi, Marc Verdier, Orphée Cugat, Thibaut Devillers

Adv. Mater. Technol. 2020, 5, 2000535. https://doi.org/10.1002/admt.202000535


MEMS fabrication using 2PP technique based 3D printer


Int. J. of 3D Printing Tech. Dig. Ind., 4(1): 12-17, (2020).


Microfabrication by two-photon lithography, and characterization, of SiO2/TiO2 based hybrid and ceramic microstructures

Desponds, A., Banyasz, A., Montagnac, G. et al.

J Sol-Gel Sci Technol 95, 733–745 (2020). https://doi.org/10.1007/s10971-020-05355-3


Enhancing the Performance of Fuel Cell Gas Diffusion Layers Using Ordered Microstructural Design

Daniel Niblett, Vahid Niasar and Stuart Holmes

doi: 10.1149/2.0202001JES – J. Electrochem. Soc. 2020 volume 167, issue 1, 013520


Multi-directional bubble generated streaming flows

Tamsin A. Spelman, Olivier Stephan, Philippe Marmottant

Ultrasonics 2019, 106054, ISSN 0041-624X


Microtopographies control the development of basal protrusions in epithelial sheets

Sylvie Coscoy, Sarah Baiz, Jean Octon, Benoît Rhoné, Lucie Perquis, Qingzong Tseng, François Amblard, and Vincent Semetey

Biointerphases 2018 13:4


Two-photon controlled sol–gel condensation for the microfabrication of silica based microstructures. The role of photoacids and photobases

J.Kustra, E.Martin, D.Chateau, F.Lerouge, C.Monnereau, C.Andraud, M.Sitarz, P.L.Baldeck and S. Parola

RSC Adv., 2017,7, 46615-46620 – DOI: 10.1039/C7RA08608C


Rapid Prototyping of Polymeric Nanopillars by 3D Direct Laser Writing for Controlling Cell Behavior

Nina Buch-Månson, Arnaud Spangenberg, Laura Piedad Chia Gomez, Jean-Pierre Malval, Olivier Soppera & Karen L. Martinez

Scientific Reports 7, Article number: 9247 (2017) doi:10.1038/s41598-017-09208-y

Bubble-based acoustic micropropulsors: active surfaces and mixers

N. Bertin, T. A. Spelman, T. Combriat, H. Hue, O. Stéphan, E. Lauga and P. Marmottant,

Lab Chip, 2017, Advance Article , DOI: 10.1039/C7LC00240H


Rapid Prototyping of Chemical Microsensors Based on Molecularly Imprinted Polymers Synthesized by Two-Photon Stereolithography

L.P.Chia Gomez, A. Spangenberg, X-A Ton, Y.Fuchs, F. Bokeloh, J-P Malval, B. Tse Sum Bui, D. Thuau, Cédric Ayela, K. Haupt, and O.Soppera

Adv. Mater. 2016, 28, 5931–5937 – DOI: 10.1002/adma.201600218


Propulsion of bubble-based acoustic microswimmers.

N. Bertin, Tamsin A. Spelman, O. stephan, L. Gredy, M. Bouriau, E. Lauga and P. Marmottant

Phys. Rev. Appl. 4 (2015) 064012.


High-speed 3D laser printing by two-photon induced chemistry: breaking the centimeter-scale limit.

P. Baldeck, B. Chichkov , M. Farsari, P. Romero, O. Nerea, O. Stephan, K. Heggarty

Photonics West OPTO 2015 SPIE, (2015), vol. 9360-­‐34.


 Recent advances in two-photon 3D laser lithography with self-Q-switched Nd:YAG microchip lasers.

P.L. Baldeck, P. Prabhakaran, C.-­‐Y. Liu, M. Bouriau, L. Gredy, O. Stephan, T. Vergote, H. Chaumeil, J.-P. Malval, Y.-H. Lee, C.-L. Lin, C.-T. Lin, Y. Hsun Hsueh, T.-T. Chung

Proc. SPIE (2013) 8827:6.


Nonlinear Photochemistry and 3D Microfabrication with Q-Switched Nd:YAG Microchip Lasers.

P.L. Baldeck, T. Scheul, M. Bouriau, O. Stephan, J.-P. Malval, C.-L. Lin, C.-T. Lin, C.-L. Tseng, C. Huang, T.-T. Chung

Proc. SPIE (2013) Vol. 8113 811309-­‐3.


 Laser microstructuration of three-dimensional enzyme reactors in microfluidic channels

Monica Iosin, Teodora Scheul, Clément Nizak, Olivier Stephan, Simion Astilean, Patrice Baldeck

Microfluid Nanofluid (2011) 10:685–690


 Microstructuration of protein matrices by laser-induced photochemistry

M. Iosin, O. Stephan, S. Astilean, A. Dupperay, P.L. Baldeck

Journal of optoelectronics and advanced materials, Vol. 9, No. 3, March 2007, p. 716 – 720


Three-dimensional microfabrication by two-photon-initiated polymerization with a low-cost microlaser.

Irène Wang, Michel Bouriau, Patrice L. Baldeck, Cécile Martineau, Chantal Andraud.

Optics Letters, Optical Society of America, 2002, 27 (15), pp.1348-1350. 〈10.1364/OL.27.001348〉